active torch height control

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
Daddude
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Sep 24, 2017 3:48 am

active torch height control

Post by Daddude »

I want to add active torch height control to my table. Has any one had experience with this and can you recommend a good system? My table has a passive type set up with a micro switch sensor. But this is not an active system, it senses once and does not do anything after that.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: active torch height control

Post by acourtjester »

It may help if you give more info about your table, like brand :roll:
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Daddude
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Sep 24, 2017 3:48 am

Re: active torch height control

Post by Daddude »

I have one of the original Burntables
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: active torch height control

Post by gamble »

Flashcut
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”