Flashcut information for Plasma

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
fbyoung1
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Feb 07, 2018 11:04 pm

Flashcut information for Plasma

Post by fbyoung1 »

Is anyone running a Flashcut controlled Plasma? If so I have some questions.
thanks
NWILL
1 Star Member
1 Star Member
Posts: 19
Joined: Mon Sep 12, 2016 4:30 pm

Re: Flashcut information for Plasma

Post by NWILL »

I run Flashcut. I believe Gamble on here does as well.
islander261
2.5 Star Member
2.5 Star Member
Posts: 162
Joined: Sun Jan 12, 2014 2:30 pm

Re: Flashcut information for Plasma

Post by islander261 »

I run Torchmate 3 which is a rebadged version of Flashcut. There should still be a large installed base of versions 2-4 with Torchmate users.

John
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”