DIY Table from instructables.com

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
PlayingDirtyRacing
1 Star Member
1 Star Member
Posts: 19
Joined: Mon Sep 19, 2016 2:33 pm

DIY Table from instructables.com

Post by PlayingDirtyRacing »

We built our own table using the plans from instructables.com.
Part of this build required some laser cut brackets for the build.
Well getting a small batch of these brackets made turned out to be a bit over $1000 for the set.
We decided to purchase 10 sets of brackets. We sold the 9 extra sets to various perple.
After building this table and running it for a couple months, we decided to make a few changes to the brackets for better performance.
Well we ordered 11 sets of the new brackets and it made a huge difference in the table performance.
I still have 3 sets of brackets left to sell. I will not be ordering another set after these sell.
So if you are interested in building your own table, I suggest you take a look at this table and the build.
The bracket kits are $425.
If you are interested in purchasing a set, just respond and we an go from there.
Thanks
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: DIY Table from instructables.com

Post by Scratch »

Pics or link to instructable?
I think I'm the oldest 10 year old boy on the forum...
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: DIY Table from instructables.com

Post by tcaudle »

Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”