It is currently Sat Nov 18, 2017 1:43 am

 

How to control a servo motor?

Share and learn with other DIY members who have built their own plasma tables and accessories.
User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 413
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

How to control a servo motor?

Postby Scratch » Sat Sep 23, 2017 5:26 pm

Because of a problem I'm having in another thread, I want to build my own THC basically. Or more simply put, I want to control a servo motor separately.

I want to disconnect the Z axis servo motor from my CNC table setup, and somehow control it completely separately.

That's basically what I'm doing now since I don't have ATHC. I just sit on a chair with a welding helmet on and watch the spark cutting, bringing the head up and down by eye. I'm completely used to it by now and I don't use it enough to upgrade to a new system.

So how can I manually control this servo motor to go up and down? It has the power cable coming out of it, which is easy to get to, and it has a RJ45 connector going into it at the encoder. Here's a pic:
Image

What do I need to do to make that happen?
I think I'm the oldest 10 year old boy on the forum...

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2794
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: How to control a servo motor?

Postby acourtjester » Sun Sep 24, 2017 9:39 am

Google the manufacturing Company and model of the servo for wiring diagram or other info.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

rbmgf7
Posts: 23
Joined: Sat Apr 01, 2017 5:38 pm

Re: How to control a servo motor?

Postby rbmgf7 » Sat Oct 14, 2017 9:50 pm

Not sure we're understanding you. You say you bring the head up and down while watching the cut. Are you doing this with a controller or physically doing it with your hands? If you're doing it with a controller, aren't you already manually moving it up and down?

Regardless, all motors (stepper, servo, etc) are driven by a driver and controlled by a controller. Depending on the configuration, the driver turns the motor a specific amount of degrees based on the step signal/pulse from the controller.


Return to “DIY Plasma Table & Accessory Discussion Forum”

Who is online

Users browsing this forum: Google [Bot] and 1 guest