It is currently Thu Nov 23, 2017 12:43 am

 

fixture design

Share and learn with other DIY members who have built their own plasma tables and accessories.
dava
Posts: 8
Joined: Thu Apr 22, 2010 4:59 pm

fixture design

Postby dava » Mon May 29, 2017 10:21 pm

I am looking for some fixturing for cutting angles, channels, and tubes, any ideas?

motoguy
Posts: 917
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: fixture design

Postby motoguy » Mon May 29, 2017 11:31 pm

This is something I keep meaning to look into, but haven't yet. I would be very interested in seeing people's fixturing ideas. Also ideas on self-made laminated dies.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

HaasMetalDesigns
Posts: 153
Joined: Mon Mar 18, 2013 4:40 am

Re: fixture design

Postby HaasMetalDesigns » Tue Jun 20, 2017 9:50 pm

I cut a lot of angle iron this is how I do it
I take a sheet of 14g-11g steel to start the fixture
Let's say I am cutting 4in angle cut at 9in 12in and 16in in length

What I do I take the sheet metal and cut 4by16in squares I array them as much as I could fit on the sheet and also I will cut a small hole at the x and y at 0 the square will start at x and y 1in after I cut the sheet I do not move it at all I most of the time put 100 pounds on it to help it not to move at all remember if it move the fixture is trash
Now I will put the angle on the table in the hole I cut and there is your fixture i hope I explain that will for you guys


Return to “DIY Plasma Table & Accessory Discussion Forum”

Who is online

Users browsing this forum: No registered users and 3 guests