It is currently Wed Jan 18, 2017 3:13 pm

 

Downdraft table questions

Share and learn with other DIY members who have built their own plasma tables and accessories.
goodhue1
Posts: 9
Joined: Wed Jan 21, 2015 10:20 pm
Location: Goodhue Minnesota
Contact:

Downdraft table questions

Postby goodhue1 » Sun Dec 18, 2016 10:45 pm

I bought a used plasmacam last week and my new air compressor is coming tomorrow. I just need to put together a ventilation system. My main concern is loosing all my near from the shop. As I type this it is -15 out and I feel like if I had a fan running I could suck all the heat our of my little shop in 30 seconds. Do you guys have any tips for me as I figure out my ventilation? Thank you!

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1236
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Downdraft table questions

Postby tnbndr » Mon Dec 19, 2016 9:51 am

Look into a water table instead of ventilation exhaust. There is lots of info on this forum.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
Eagle CP30 Tube Roller
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl

KIDTech
Elite Contributing Member
Elite Contributing Member
Posts: 336
Joined: Tue Oct 28, 2014 1:21 pm
Contact:

Re: Downdraft table questions

Postby KIDTech » Tue Dec 20, 2016 9:31 am

A lot of it has to do with how much money and time you want to throw at it. I have down draft only, thinking about doing a drip feed that rides the gantry putting water on top of the metal as it cuts.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill

SONIC
Posts: 40
Joined: Mon Nov 07, 2016 9:28 am
Contact:

Re: Downdraft table questions

Postby SONIC » Tue Dec 20, 2016 10:22 am

Water table for sure.
There's no way to ventilate the table without sucking the air out of your shop, unless you made a separate booth/room that was vented to outside air for the table.
I run mine inside all day with the water table with no issue

allan101
Posts: 15
Joined: Sat Jun 13, 2015 3:57 pm
Contact:

Re: Downdraft table questions

Postby allan101 » Mon Jan 02, 2017 2:45 am

I have set up a smoke extraction arm that I scavenged and hooked it up to ventilate into a smoke and fume filter it works awesome. All my heat stays in the shop I have mine mounted to a i beam with trolley wheels so I can move it around
IMG_0056.JPG
IMG_0056.JPG
IMG_0057.JPG
and it is off the floor


Return to “DIY Plasma Table & Accessory Discussion Forum”

Who is online

Users browsing this forum: No registered users and 2 guests