My DIY Downdraft Work Table

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

My DIY Downdraft Work Table

Post by msimpson99 »

This is a project I completed about seven months ago. I always take lots of pictures when I am working on any kind of project, just in case.

Its a 32" x 22" table thats great for cutting, sanding, grinding and welding small parts.
_MG_2756b.jpg
It was designed so that it could be completely torn down if needed for upgrades, cleaning, or repair. This was also an experiment on using different CFM blowers for use with downdraft tables.

You can see my full write up here:
http://www.kronosrobotics.com/easy-down-draft-table/

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Ray P Mehl
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Mon Dec 19, 2016 1:58 pm

Re: My DIY Downdraft Work Table

Post by Ray P Mehl »

Nice job.
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: My DIY Downdraft Work Table

Post by SeanP »

Great job!
I like your carriage you made there for cutting, very effective!
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”