It is currently Sun Sep 24, 2017 6:21 am

 

Air scribe v s electric spindle motor

Questions and information relating to plate markers should be posted in this forum.
User avatar
Sampson Jones
Elite Contributing Member
Elite Contributing Member
Posts: 282
Joined: Mon Jul 25, 2011 9:30 pm
Contact:

Air scribe v s electric spindle motor

Postby Sampson Jones » Wed Jul 05, 2017 7:47 am

Thinking when I build my scribe what to get . E bay has some electric spindle motors and mounts in the 140.00 range . I was going with an air scribe ,but this has me thinking. Anybody have any imput ? Thanks
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 45
Mach 3
Sheetcam
Corel Draw x 5

User avatar
WyoGreen
Elite Contributing Member
Elite Contributing Member
Posts: 580
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming
Contact:

Re: Air scribe v s electric spindle motor

Postby WyoGreen » Wed Jul 05, 2017 11:08 am

I use an air scribe. If you look close you can see the individual "dots". It takes a bit of twiddling to get the air pressures just right, and you have to have an in-line oiler to lube the scribe. Several members on here use a Dremel type tool and seem to have good luck with it. I've been thinking that might be the easier way to go and have been considering it myself. I'm sure several of those guys will chime in shortly, and a search should turn up a bunch of posts on this subject.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
CNC Router table

User avatar
_Ogre
Posts: 510
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown
Contact:

Re: Air scribe v s electric spindle motor

Postby _Ogre » Wed Jul 05, 2017 1:13 pm

i went thru the dance of making an air scribe for our table thinking we could make part labels to weld on
you need to hold the scribed part at the right angle in the right light to see any text
major disappointment :(
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2742
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla
Contact:

Re: Air scribe v s electric spindle motor

Postby acourtjester » Wed Jul 05, 2017 2:03 pm

Another thing is you could use a trim router with an engraving bit, they are smaller the a standard router.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

hsolve
Posts: 64
Joined: Tue Sep 22, 2015 4:23 am
Contact:

Re: Air scribe v s electric spindle motor

Postby hsolve » Thu Jul 06, 2017 11:11 pm

Good morning gents.
I have a air scribe attached to the Z drive of the plasma torch. It is used to mark center holes, bend lines and add text to parts cut on the plasma. You can adjust the marking indent easily with a air just by adjusting the 'throttling' of the scribe or by the applied air pressure. It will leave a sufficient indent on steel and S/S to see. It takes up less space than a electric which makes it easier to combine with the plasma torch on the Z drive. I like it

tcaudle
Posts: 730
Joined: Tue Feb 28, 2012 6:47 pm
Contact:

Re: Air scribe v s electric spindle motor

Postby tcaudle » Sun Jul 09, 2017 1:55 pm

engraving is a whole different process than marking with an electric or pneumatic scriber tool. To do engraving right you need a rotary engraving bit (V shaped) . This presents a problem. The deeper you let it cut the wider the line and the more torque it takes to keep it from bogging down. To do it correctly you have to have a PCD: "Penetration Control Device" ( sounds nasty) in the form of an adjustable hollow nozzle that surrounds the V bit and rides on the work so it follows the contour of the metal. The cutting tool must be floating and not put the entire weight of the tool on the cut, so the there needs to be an adjustable counterweight spring. The PCD has to be adjusted so you have a few thousands of penetration. I built one for a small CNC table that I wanted to do engraving and even route PCB's on, and I used a Foredom hand rotary tool and turned a holder for the end cap of a solder sucker with the nylon nosepiece that mounted on the same holder as the hand piece. It was a bear to setup each time because the difference between a .005 and .01 depth makes a lot of difference in the width of the engraved lines. I used it to engrave 304 Stainless hand turned mechanical pencils with names and artwork in a small rotary axis....but that is another story.

james.davis
Elite Contributing Member
Elite Contributing Member
Posts: 842
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.
Contact:

Re: Air scribe v s electric spindle motor

Postby james.davis » Sun Jul 23, 2017 10:25 am

Has anyone used the one Plasma Cam makes? Is it worth the money?
Thanks,
Jim


Return to “Plate Markers/Air Scribes”

Who is online

Users browsing this forum: No registered users and 1 guest