Search found 5 matches

by morocco119
Fri Sep 08, 2017 8:58 pm
Forum: DIY Plasma Table & Accessory Discussion Forum
Topic: Gcode Error, Help!
Replies: 10
Views: 410

Re: Gcode Error, Help!

courtjester, You were right! Ran a program and let the THC do its thing. Set the Z height to probe and back off 0.25" and the THC controller lit up and adjusted the Z height automatically. The table runs pretty well, cut out a 3" circle as a test and it's 1/16 shy but a circle nonetheless,...
by morocco119
Wed Sep 06, 2017 8:55 pm
Forum: DIY Plasma Table & Accessory Discussion Forum
Topic: Gcode Error, Help!
Replies: 10
Views: 410

Re: Gcode Error, Help!

Alright update time, I purchased and installed Mach 3 for the Plasma table and in turn installed a custom post from Autodesk for Mach plasma and everything works smoothly as in running a program (torch probes material, backs off and fires) no Gcode errors to be found yet. Unfortunately a new issue i...
by morocco119
Wed Aug 23, 2017 5:09 pm
Forum: DIY Plasma Table & Accessory Discussion Forum
Topic: Gcode Error, Help!
Replies: 10
Views: 410

Re: Gcode Error, Help!

Yes both programs were set to inch dimensions, For anyone else that might run into the scaling problem in the future. Inkscape version 9.2 was updated but the extensions were not updated to work with 9.2 causing scaling issues, downgrading to version 9.1 has fixed the issue. on linuxcnc fourms it lo...
by morocco119
Fri Aug 18, 2017 12:53 pm
Forum: DIY Plasma Table & Accessory Discussion Forum
Topic: Gcode Error, Help!
Replies: 10
Views: 410

Re: Gcode Error, Help!

Thank you for your help, I read through the README.txt file again and came across it saying this version of Linux didn't need any postprocessor and it ran off of inkscape to generate Gcode through a plug-in. Ran the program on a simulated linuxCNC computer and the file had no problem opening but eve...
by morocco119
Tue Aug 15, 2017 12:23 pm
Forum: DIY Plasma Table & Accessory Discussion Forum
Topic: Gcode Error, Help!
Replies: 10
Views: 410

Gcode Error, Help!

Hello, I have successfully assembled and wired a 4x4 plasma table out of raw materials but I have one issue between my CAM and machine. everytime i go to load up a file to cut it gives me this error: "Near line 3 of /home/smkcnc/Desktop/1001.ngc: P word with no G2 G3 G4 G10 G64 G5 G5.2 g76 g82 ...

Go to advanced search