Search found 232 matches

by icmplasma85
Thu Oct 12, 2017 5:47 pm
Forum: File Conversion Help Wanted
Topic: Long Horn Steer
Replies: 2
Views: 115

Re: Long Horn Steer

DXF attached.
by icmplasma85
Wed Oct 11, 2017 12:04 pm
Forum: CNC Plasma Cutters General Forum
Topic: Sharpe 3 stage air dryer filter replacements from Plasmaspider
Replies: 0
Views: 63

Sharpe 3 stage air dryer filter replacements from Plasmaspider

Just want to throw this out there because many of you may not think to buy these from the forum store because they are not shown on the site, but I recently purchased the filter replacements for this system from Plasmaspider. If you are in need of these don't hesitate to PM admin and ask for them. T...
by icmplasma85
Mon Sep 25, 2017 1:13 pm
Forum: Plasma Cut Quality Forum
Topic: Plasmacam Settings Chart?
Replies: 4
Views: 137

Re: Plasmacam Settings Chart?

The book specs from Hypertherm work great for all of their systems. I also have a powermax 65 and a DHC2 from Plasmacam and cut 1/8" with fine cut consumables (45amps). Your cut height on steel is almost always going to be .06". Other settings for 1/8" should be: 45amps/fine cut consu...
by icmplasma85
Tue Sep 19, 2017 7:46 am
Forum: File Conversion Help Wanted
Topic: Diamond Reo truck
Replies: 2
Views: 153

Re: Diamond Reo truck

Here ya go.

diamond reo.dxf
(58.44 KiB) Downloaded 19 times
by icmplasma85
Mon Sep 11, 2017 8:31 pm
Forum: CNC Plasma Cutter Project Picture Gallery
Topic: GoT Firepit
Replies: 1
Views: 353

GoT Firepit

Just got done putting this pit together. Here's a few screenshots of the flat design. Will post more pics once I'm completely done with the pit.
by icmplasma85
Fri Sep 01, 2017 12:20 am
Forum: BobCAD
Topic: need help with lnes
Replies: 6
Views: 191

Re: need help with lnes

Wasn't planning on doing the entire file but I do conversions for pay if you wanted to go that route. I just joined the outside and you had a whole lot of lines not joined together. Try using whatever snaps your software has and see if that helps.
by icmplasma85
Thu Aug 31, 2017 7:10 pm
Forum: File Conversion Help Wanted
Topic: Help With Converting File
Replies: 2
Views: 186

Re: Help With Converting File

This is not complete or cut ready but its a good start. Maybe someone can take this and finish the remaining detail and bridge parts that need bridging to make it cut ready.

Image
UNDERWATER DEMO.dxf
(410.94 KiB) Downloaded 12 times
by icmplasma85
Wed Aug 30, 2017 8:21 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: SKULL KNIVES AND FLAG MILITARY LOGO
Replies: 4
Views: 684

SKULL KNIVES AND FLAG MILITARY LOGO

Drew this a while back and forgot I had it. I think its either army or marines but not 100% on that. Hopefully someone can use it.
Image
SKULL KNIVES AND FLAG MILITARY LOGO.dxf
by icmplasma85
Mon Aug 28, 2017 9:55 am
Forum: CNC Plasma Cutters General Forum
Topic: Stair DWGS
Replies: 11
Views: 896

Re: Stair DWGS

First reply here.... I do mostly architectural iron and have built a few stairs over the years and always struggle and second guess myself usually building full scale mock ups before making anything "real" I would love to have some input from someone who knows what they are doing. I actua...
by icmplasma85
Wed Aug 23, 2017 4:21 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: have a print need cad work done .
Replies: 12
Views: 405

Re: have a print need cad work done .

Normally I'd draw and dimension this is autocad because it's much cleaner but this is from designedge so it's a little cluttered. I actually went back and really tried to scale everything based on given dimensions and came up with this. I separated the part you need and tried to show as many dimensi...
by icmplasma85
Wed Aug 23, 2017 12:20 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: have a print need cad work done .
Replies: 12
Views: 405

Re: have a print need cad work done .

1. A 6.5 inch radius is a 6.5" radius; It's measured from the center of the arc, You don't need to have the origin on the drawing to figure out the shape.You can find the origin point of the arc radius with a compass or in a cad program with construction lines from the end of the primary arc ....
by icmplasma85
Wed Aug 23, 2017 1:40 am
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: have a print need cad work done .
Replies: 12
Views: 405

Re: have a print need cad work done .

There's not enough info on that drawing as shown to draw the part accurately. I need to know where the radius' shown are measured from. There has to be a work point somewhere. PM me and we'll get it figured out. I do CAD work for a living and specialize in commercial stairs and handrails. Would defi...
by icmplasma85
Tue Aug 15, 2017 7:10 pm
Forum: CNC Plasma Cutters General Forum
Topic: North Carolina Trooper's badge
Replies: 2
Views: 206

Re: North Carolina Trooper's badge

I'll give ya a quote and we can go from there. PM to discuss details about final piece so I can put a price together for you.
by icmplasma85
Thu Aug 10, 2017 6:31 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Script style font
Replies: 5
Views: 828

Re: Help with letter tracing

DXF attached.
Image
gather.dxf
by icmplasma85
Wed Aug 09, 2017 11:34 pm
Forum: CNC Plasma Cutters General Forum
Topic: Copyright letter
Replies: 21
Views: 1295

Re: Copyright letter

What was the outcome or are you still fighting/dealing with it? I've always wondered what lengths companies can go to when you don't actually have a business. I do metal art as a hobby too, been pretty slow lately but I try to stay away from trademarked or copyrighted items. I just wonder what I wou...
by icmplasma85
Wed Aug 09, 2017 7:30 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Looking for help converting this graphic for a Veteran in the family
Replies: 4
Views: 210

Re: Looking for help converting this graphic for a Veteran in the family

Just traced the parts you'll have to figure out how you want to cut it. You may need to layer it for best look. Scaled it a little less than 2ft. If you plan on making much smaller double check dimensions of everything.
by icmplasma85
Mon Jul 31, 2017 4:29 am
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Monster truck conversions
Replies: 6
Views: 786

Re: Monster truck conversions

Here's the chevy. If you still need the other one I'd charge for that one but this one is on the house. Hopefullly you still needed it.

Image
jacked up chevy.dxf
by icmplasma85
Thu Jul 06, 2017 1:29 am
Forum: PlasmaCam
Topic: PlasmaCam Pricing
Replies: 7
Views: 1080

Re: PlasmaCam Pricing

Right around 15K will get you a 4x4 table, a Hypertherm plasma cutter, advanced design software, advanced machine control, and most importantly advanced height control. Do yourself a favor and do not buy a Plasmacam (or any table for that matter) without advanced height control (ohmic sensing). If m...
by icmplasma85
Fri Jun 30, 2017 3:37 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Pirate Face - School Sign
Replies: 18
Views: 1290

Re: Donation For Local School Seeking Advice.

I can give you a one layer cut ready file but not for free. Let me know if you're interested.
by icmplasma85
Thu Jun 29, 2017 8:26 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Stilt Beach House
Replies: 4
Views: 491

Re: Help. Turn pic into DXF

Here is a start. Would've finished it for you but I have some other stuff I need to work on and not getting paid for this one :lol: I do conversions for others on here so feel free to PM me for a quote if you have other stuff you need done. http://www.plasmaspider.com/images/BeachHouse.png BEACH HOU...
by icmplasma85
Thu Jun 22, 2017 1:21 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Company Logo with Tree
Replies: 13
Views: 1003

Re: Need Help converting to DXF

This is one way to do it but you will still need to edit the shadows on pretty much every letter, trimming some of them back to allow for more bridging. And figure out the most effective way to stencil the R's. This is sized @ just under 24" and with 20 to 30 min of editing the shadows will be ...
by icmplasma85
Tue Jun 13, 2017 12:06 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Beer logo conversion
Replies: 18
Views: 1070

Re: Beer logo conversion

Advanced DesignEdge from Plasmacam. Hands down most user friendly software there is for anything from drawing complex parts to making articstic files.
by icmplasma85
Tue Jun 13, 2017 9:33 am
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Beer logo conversion
Replies: 18
Views: 1070

Re: Beer logo conversion

This may not be exactly how you wanted to cut it but this dxf file is cut ready at 2ft diameter.

Image

HONEYHAUS BREWERY.dxf
by icmplasma85
Sat Jun 03, 2017 2:36 am
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Natural Element Design - What Font?
Replies: 3
Views: 501

Re: need so help

Not sure which font. If you need the entire alphabet in this font, this file won't be much help but here is what was in the picture.
Image
NATURAL ELEMENT DESIGNS.dxf
by icmplasma85
Fri Jun 02, 2017 12:58 pm
Forum: DXF Art - DXF Clip Art File Sharing Forum
Topic: Weather Vane Top
Replies: 4
Views: 845

Re: NEED HELP converting

Revised file w/hat attached.

Image

MCCLINTOCK3 with HAT.dxf

Go to advanced search